使用シーンを動画でCHECK!

  • FA
  • 公共

FAシーン Factory Automation

Case1 「タクトタイムの見える化」で組み立てラインの進捗管理の徹底!動作モードはタイムトリガタイプ

作業進捗にムラが発生!
Workers along the assembly line were not aware that they were completing tasks at different rates, causing the line to progress at various speeds.

Before After

作業進捗時間を見える化!
Now each worker along the line can know how much time is left to minimize delays and allow the line to flow more consistently.
作業残り時間を段数で表示

「作業進捗がリアルタイムにわかる!」「作業進捗時間表示」進捗管理で稼働率・生産性の向上

Case2 「センサ連携・アナログ機器情報の見える化」で予兆管理!動作モードはパルストリガタイプ

しきい値がわからない!
Only circumstances of the equipment’s abnormal condition were displayed, but neither a threshold point nor elapsed time from an abnormal condition was understood.

Before After

しきい値の見える化!
The threshold point is displayed in real time and can be seen from a distance. By including an elapsed time display, equipment priority can be grasped and prompt action can be made before abnormalities arise.
しきい値に応じてメモリ表示

「しきい値が遠方から一目でわかる!」「レベル表示」異常発生を予防し生産性向上

Case3 「切削油量の見える化」で補充タイミングが明確に!動作モードはパルストリガタイプ

油量がわからない!
When checking the capacity of the cutting-fluid tank, visual confirmation is made for the in-ground tank by installing floatation devices, but the time and effort to check has a delay.

Before After

油量を遠方から見える化!
The amount of cutting fluid is made visible in real time and can be seen from a distance, which allows multiple machines to be monitored at a glance and appropriate responses can be made.
タンク残量をレベル表示

「油量の状態が遠方から一目でわかる!」「残量表示」 油量の見える化で確認作業の無駄をカット

Case4 「各種異常状態の見える化」で多台持ち負担軽減!動作モードは単表示タイプ

異常内容が一目でわからない!
Abnormalities for equipment was displayed and could be seen from a distance but its severity could not be determined unless extra time was taken to approach the machine.

Before After

各種異常を遠方から見える化!
Now equipment can be checked for abnormalities at a glance from a distance, and when all tiers light up, prompt attention can be given.
異常状態別に全段表示

「各状態が色別で遠方から一目でわかる!」「全段識別表示」遠方からの見える化で製造担当者の負荷低減